pc1004 15 all specif icat ions subject t o change wit hout not ice. dcr max. (?) idc max. (a) allied part number inductance (h) tolerance (%) test freq. pc1004-100m-rc pc1004-120m-rc pc1004-150m-rc pc1004-220m-rc pc1004-270m-rc pc1004-390k-rc pc1004-470k-rc pc1004-560k-rc pc1004-680k-rc pc1004-820k-rc pc1004-101k-rc pc1004-121k-rc pc1004-151k-rc pc1004-181k-rc pc1004-221k-rc pc1004-271k-rc pc1004-331k-rc 10 12 15 22 27 39 47 56 68 82 100 120 150 180 220 270 330 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 2.52mhz,1v 2.52mhz,1v 2.52mhz,1v 2.52mhz,1v 2.52mhz,1v 2.52mhz,1v 2.52mhz,1v 2.52mhz,1v 2.52mhz,1v 2.52mhz,1v 1khz,1v 1khz,1v 1khz,1v 1khz,1v 1khz,1v 1khz,1v 1khz,1v 0.05 0.06 0.07 0.09 0.10 0.15 0.17 0.20 0.22 0.30 0.34 0.40 0.54 0.62 0.72 0.95 1.10 2.38 2.13 1.87 1.60 1.44 1.20 1.10 1.01 0.91 0.85 0.74 0.69 0.61 0.56 0.53 0.45 0.42 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs pc1004-330k-rc 33 10 2.52mhz,1v 0.12 1.26 pc1004-391k-rc pc1004-471k-rc 390 470 10 10 1khz,1v 1khz,1v 1.24 1.53 0.38 0.35 power chip inductors revised 9/20/10 pc1004-561k-rc 560 10 1khz,1v 1.90 0.32 pc1004-180m-rc 18 20 2.52mhz,1v 0.08 1.73 features ? unshielded smd power inductor ? suitable for large currents ? available in magnetically shielded electrical inductance range: 10h to 560h tolerance: standard tolerance as shown. operating temp: -40oc ~ +85oc idc: current at which inductance drops 10% of original value with a resistance to soldering heat pre-heat 150oc, 1 min. solder composition: sn/ag3.0/cu0.5 solder temp: 260oc +/- 5oc for 10 sec 1 sec. test equipment (l): hp4192a lf impedence analyzer (rdc): chen hwa 502bc (idc): hp4284a with hp42841a or physical packaging: 700 pieces per 13 inch reel. marking: eia inductance code. ? t= 40?c whichever is lower. most values available in tighter tolerances. chen hwa 1061 + chen hwa 301a ? ideal for dc-dc converter applications test frequency: as noted pc1004-3r8m-rc 3.8 20 7.96mhz,1v 0.02 4.20 pc1004-1r0m-rc 1.0 20 100khz,1v .009 6.00 dimensions: inches (mm)
|
